Tasarım hakkında

NEW VERSION 1.0 AVAILABLE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ✅ Dummy 13 v1.0 – Optimized Joints + kit card 🔘 [ Click to go to Dummy 13 v1.0 ] ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ remix version of the DUMMY 13 Printable Jointed Figure (beta files), designed to sit on the edge of a monitor or shelf. Printable on a single plate with only 1 color change. This remix of the DUMMY 13 Printable Jointed Figure (beta files) is optimized to act as a “monitor guardian”. The joints allow you to position the character sitting on the edge of the screen, with one hand gripping the bezel and the legs hanging down. • Fully articulated figure • Proportions optimized for sitting on monitors and shelves • Ideal for two-color printing (e.g. black structure + colored details) • Designed to be printed on a single plate with one color change It is a simple model to print but very scenic once placed on your PC workstation. Remix & credits This model is a remix of: DUMMY 13 Printable Jointed Figure (beta files) I adapted the scale and print settings to obtain a version suitable for sitting stably on the edge of a monitor and to facilitate two-color printing with a single filament change. Remember to link the original model in the Remix/Credits section of the platform you use. Recommended Print Settings • Scale: 95% (optimal size for a standard monitor and to fit entirely on a single plate) • Layer height: 0.2 mm • Nozzle: 0.4 mm • Recommended material: PLA (use your standard PLA profile settings) • Infill: 15–20% (any standard pattern is fine) • Walls: 2–3 • Supports: not necessary (all parts are designed to be printed without supports) • Build plate adhesion: brim if you have issues, otherwise not mandatory Quality and Adhesion: • First layer slower for better adhesion (e.g. 50% of normal speed) • Make sure the build plate is clean before printing for the best possible result Color Change Management: • Print “by object” to minimize color changes • Print profile designed for a single color change (e.g. body one color and details another) • You can use a layer pause / M600 command for filament change (depending on your printer) Assembly / Posing Tips • After printing, gently move all joints to unlock them. • Position the dummy sitting on the edge of the monitor or a shelf. • Use one hand of the model to “hook” onto the edge to increase stability. • You can adjust the position of the legs and arms to find the best balance. Baskı profili: 0.2mm layer, 6 walls, 25% infill, 95% scaled • Scala: 95% (dimensione ottimale per stare su un monitor standard e per stare tutta su un solo piatto) • Altezza strato: 0,2 mm • Ugello: 0,4 mm • Materiale consigliato: PLA (usa le impostazioni standard del tuo profilo PLA) • Infill: 15–20% (qualsiasi pattern standard va bene) • Perimetri: 2–3 • Supporti: non necessari (tutte le parti sono pensate per essere stampate senza supporti) • Adesione al piatto: brim se hai problemi, altrimenti non obbligatorio — Kaynak: MakerWorld (https://makerworld.com/tr/models/2006041-dummy-13-1-optimized) Tasarımcı: guala Lisans: BY Bu dosya özgün lisansına uygun olarak, kaynak ve tasarımcı bilgisi korunarak yayımlanmıştır.

Baskı ayarları

Ayarlar başlangıç önerisidir. Baskıdan önce modeli dilimleyicinizde kontrol edin.